Ceramic 3D printer StoneFlower
StoneFlower 4.0
3D printer for clay, porcelain, concrete
NETTO PRICE 4200 €
User-friendly and fast 3d printer with all-metal precise and durable print head, volumetric flow control, advanced electronics, and large build volume
- Large printing volume, 50 x 50 x 50 cm3 = 125L
- Control via 5" colorful touchscreen (with variable orientation of the screen for convenient installation either on a table or floor)
- File uploading and printing via WiFi/Ethernet or USB
- Upon printing: pause/resume of the print, variable printing/extrusion speed, bed level correction
- Duet 3D WiFi/Ethernet 32bit electronics
- Salient and powerful TMC drivers
- Strong Nema23 motors
- IGUS bearings and cable chains for use in dusty and humid conditions
- Emergency stop button and completely shielded belt drives for safe operation
- All-metal frame for stable printing at high speeds.
- Easily accessible printing volume
- Full control over printer settings in real time via WiFi and web interface from your computer. Settings are stored in a text file.
- Extended (up to 80cm) height of the printing volume is possible on the request
4.998,00 €
incl. VAT, shipping costs apply
- 85 kg
- Available
- Ships in 4 weeks1
Construction
Amount of dispensed material is precisely controlled by the ram extruder, and does not depends on viscosity and other factors. Auger extruder in the print head removes air-bubbles, if there are some in manually prepared material. Lightweight print head allows high printing speeds with no vibrations. Cartesian construction of the printer let us to minimize the length of the pipe between print head and ram extruder and use materials of very high viscosity, such as natural clay or porcelain.
Our Paste Deposition Modeling (PDM) technology lets printing at much higher rate, as compared to desktop FDM printers, which use thermoplastics. One can easily control the process choosing the nozzle diameter in the range from 0.5 to 7 mm. The layer thickness may vary from tiny 0.3 mm for precise printing up to 3 mm for maximal performance.
Materials
No any special proprietary materials are required. To print ceramics one can use normal wet clay or porcellain after admixing of 5-15% wt. of water or ethanol (to improve mechanical stability of large models). Printed parts can be processed in a standard way.
One can also use other pastes or highly viscous liquids compatible with the material of the ram extruder (PVC), or with disposable syringes of Micro Printing Set.
Note: Our equipment is not certified as a food grade.
Specifications
- Printing speed 30...100 mm/s
- Build volume 48 x 53 x 50cm (can be extended up to 80cm by the request)
- Nozzle diameter 0.5...7mm
- Print head from stainless steel 6.0
- Ram extruder L, 1.5l capacity
- Micro Printing Set
- Colorful touchscreen
- Compatible with all slicing software
- 32-bit electronics for fast and easy printing
- WiFi
- Printer frame dimensions W x D x H: 78 x 85 x 90cm (without tray, mount for ram and display)
- Printer height with vertically mounted ram 210 cm
- Weight 35kg