Print heads for clays, mortar, pastes. Spare auger screws. Nozzles.

Features:

• durable chemically resistant two-flute auger screw (SS 316)
• leak-free construction, easily replaceable standard seal and bearing
• stator from stainless steel SS 304
• Durable and strong steel mount. Stator with seven threaded M5 channels, and standard 1/2 and 1/4 inch holes with NPT thread for inlet and outlet respecively.

Specifications:

• Dimensions WxDxH = 42x72x124mm (without nozzle)
• Screw length 62mm, diameter 8mm
• Inlet: push-in connector for 16mm pipe (external diameter)
• Outlet: 1/4 NPT threaded hole for up to D=8mm ouput flow
• Comes with metallic nozzles: 2.5mm, 4mm, 7mm, nozzle adapter for standard luer tips, 6 different PE luer tips (0.2mm ... 1.55mm)
• Stepper motor Nema17, 2.5A/phase, 40Ncm, 2-phase, 1.8deg.

This is a spare part! While the print head can be directly connected to the motherboard of a 3D printer, we recommend to use this as a part of 3D Printing KIT and connect to the printer via Control Unit. When used without control unit, this may need to change settings of your stepper motor driver. In case of questions please contact us.

Features:

• Geared stepper motor Nema 17 (5:1 gear ratio)
• durable chemically resistant two-flute auger screw (SS 316)
• leak-free construction, easily replaceable standard seal and bearing
• stator from stainless steel SS304
• Durable and strong steel mount. Stator with seven threaded M5 channels, and standard 1/2 and 1/4 inch holes with NPT thread for inlet and outlet respecively.

Specifications:

• Dimensions WxDxH = 42x72x124mm (without nozzle)
• Screw length 62mm, diameter 8mm
• Inlet: push-in connector for 16mm pipe (external diameter)
• Outlet: 1/4 NPT threaded hole for up to D=8mm ouput flow
• Comes with metallic nozzles: 2.5mm, 4mm, 7mm, nozzle adapter for standard luer tips, 6 different PE luer tips (0.2mm ... 1.55mm)
• Stepper motor Nema17, 2.5A/phase, 40Ncm, 2-phase, 1.8deg.

This is a spare part! While the print head can be directly connected to the motherboard of a 3D printer, we recommend to use this as a part of 3D Printing KIT and connect to the printer via Control Unit. When used without control unit, this may need to change settings of your stepper motor driver. In case of questions please contact us.

Features:

• highly corrosion-resitant stainless steel 304 components.
• easy to disassemble and clean, thanks to standard tri-clamp connectors.
• powerful rapid mixer, rotating at the speed up to 300rpm, perfectly mixing and plasticising concretes and clays, used for 3d printing.
• regulated rotation speed.
• has standard adapters and connectors for concrete (1inch thread, 1.5inch tri-clamp adapter), and accelerator (3/8inch thread, 10mm push-in connector) to fit into diverse printing setups.
• back-flow valve in the accelerator inlet prevents clogging of the accelerator line with the solidified concrete.
• Customizable nozzles with the maximumin nozzle size 50mm.